Status sensors, stainless steel with bracket for toggle clamps
Item description/product images
DescriptionProduct description:Status sensors with brackets are used to monitor the actuated status of toggle clamps. The sensor detects whether the toggle clamp is open or closed and enables this status information to be processed electronically. The sensor is attached to the toggle clamp via the bracket.Material:Stainless steelVersion:Bright.Note:The status sensor and brackets are supplied unassembled.Technical data:Inductive sensor: Output relay: PNP normally open (NO) Operating voltage: 10 - 30 V DC Operating current: 100 mA Switch gap: 0.8 mm Switching frequency: 5000 Hz Short-circuit proof: yes Reverse polarity protected: yes IP rating: IP 67 Connection type: 0.3 m cable, PUR, with plug Temperature range: -25° C - +70°C Approvals: CE, c-UL-us, UKCA, WEEETemperature range:Temperature range: -25 °C to +70 °CAssembly:The status sensor is fastened to the bracket with the nuts and set to dimension L1. The bracket is attached with the toggle clamp screws through holes between the foot and the mounting surface. The switch point fine-tuning is carried out once the toggle clamp is mounted. The detailed procedure is described in the assembly instructions.Accessory:Horizontal toggle clamp with horizontal foot K0660. Vertical toggle clamp with horizontal foot K0662. Connector M8x1 bush with screw lock, unshielded K1874. Cable tie block K1278. Safety:Status sensors are not suitable for protecting people.Drawing reference:
1) LED-indicator
BN = brown BK = black BU = blue
Special features:
DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
