Hexagon head bolts, stainless steel with seal washer in...

go back

Products
- Operating parts | standard elements
  - Machine and fixture components
    - Screws, nuts and washers
      - Hexagon head bolts, stainless steel with seal washer in Hygienic DESIGN

Item description/product images

DescriptionProduct description:The Hygienic DESIGN fastening system was specially developed for use in food-processing facilities. Special emphasis has been placed on the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. Quick and easy product installation due to a pre-mounted sealing washer rounds off the overall package.Material:

Hex head bolt: stainless steel 1.4404.
Sealing washer: EU10/2011 and FDA conform thermoplastic (POM).

Version:Hex head bolt: Polished or unpolished stainless steel.
Sealing washer: RAL5002 - Ultramarine blue (POM).Note:The contact face for the sealing ring must ideally be flat and perpendicular to the threaded hole and have a surface finish of Ra ≤ 0.8 µm.
Sealing ring is unsuitable for acidic cleaning (pH < 4) and oxidising agents.Temperature range:-20 °C to +100 °C (POM).Advantages:Pre-installed, exchangable seal washer.
Foodstuff conform material.
Cleaning optimised geometry.On request:Special versions.Attention:The suitability of the Hygienic DESIGN fasters for the respective application must be checked by the user. Depending on the loads and external influences (temperature, cleaning media, product media), the sealing washer should be inspected regularly and replaced if necessary.Accessory:Sealing washer K1649.
Stainless steel hex nut with sealing washer K1648.
Sockets with plastic inserts K1361.
Ring/open-end spanner with protective caps K1362.Threaded version:M4 - M16.Supplied withHex head bolt incl. seal washer.Drawing reference:

1) Hex head bolt
2) Sealing washer

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K1647 Hexagon head bolts, stainless steel with seal washer in Hygienic DESIGN

203 kB

Drawings

Item selection/filter

Order No.	Form	Form definition	Surface finish body	B	D	D1	D2	H	K	L	L1	R	SW	Price
K1647.1104X08	A	without shaft	polished	-	M4	10	11,25	2	11,1	8	5,9	3	7	on request
K1647.1104X10	A	without shaft	polished	-	M4	10	11,25	2	11,1	10	5,9	3	7	on request
K1647.1104X12	A	without shaft	polished	-	M4	10	11,25	2	11,1	12	5,9	3	7	on request
K1647.1104X16	A	without shaft	polished	-	M4	10	11,25	2	11,1	16	5,9	3	7	on request
K1647.1104X20	A	without shaft	polished	-	M4	10	11,25	2	11,1	20	5,9	3	7	on request
K1647.1104X25	B	with shaft	polished	14	M4	10	11,25	2	11,1	25	5,9	3	7	on request
K1647.1104X30	B	with shaft	polished	14	M4	10	11,25	2	11,1	30	5,9	3	7	on request
K1647.1104X35	B	with shaft	polished	14	M4	10	11,25	2	11,1	35	5,9	3	7	on request
K1647.1104X40	B	with shaft	polished	14	M4	10	11,25	2	11,1	40	5,9	3	7	on request
K1647.1105X10	A	without shaft	polished	-	M5	12	13,25	2	13,1	10	7,4	3	8	on request
K1647.1105X12	A	without shaft	polished	-	M5	12	13,25	2	13,1	12	7,4	3	8	on request
K1647.1105X16	A	without shaft	polished	-	M5	12	13,25	2	13,1	16	7,4	3	8	on request
K1647.1105X20	A	without shaft	polished	-	M5	12	13,25	2	13,1	20	7,4	3	8	on request
K1647.1105X25	B	with shaft	polished	16	M5	12	13,25	2	13,1	25	7,4	3	8	on request
K1647.1105X30	B	with shaft	polished	16	M5	12	13,25	2	13,1	30	7,4	3	8	on request
K1647.1105X35	B	with shaft	polished	16	M5	12	13,25	2	13,1	35	7,4	3	8	on request
K1647.1105X40	B	with shaft	polished	16	M5	12	13,25	2	13,1	40	7,4	3	8	on request
K1647.1105X45	B	with shaft	polished	16	M5	12	13,25	2	13,1	45	7,4	3	8	on request
K1647.1105X50	B	with shaft	polished	16	M5	12	13,25	2	13,1	50	7,4	3	8	on request
K1647.1106X12	A	without shaft	polished	-	M6	14	15,74	2,5	15,1	12	9,1	3	10	on request
K1647.1106X16	A	without shaft	polished	-	M6	14	15,74	2,5	15,1	16	9,1	3	10	on request
K1647.1106X20	A	without shaft	polished	-	M6	14	15,74	2,5	15,1	20	9,1	3	10	on request
K1647.1106X25	A	without shaft	polished	-	M6	14	15,74	2,5	15,1	25	9,1	3	10	on request
K1647.1106X30	B	with shaft	polished	18	M6	14	15,74	2,5	15,1	30	9,1	3	10	on request
K1647.1106X35	B	with shaft	polished	18	M6	14	15,74	2,5	15,1	35	9,1	3	10	on request
K1647.1106X40	B	with shaft	polished	18	M6	14	15,74	2,5	15,1	40	9,1	3	10	on request
K1647.1106X45	B	with shaft	polished	18	M6	14	15,74	2,5	15,1	45	9,1	3	10	on request
K1647.1106X50	B	with shaft	polished	18	M6	14	15,74	2,5	15,1	50	9,1	3	10	on request
K1647.1106X60	B	with shaft	polished	18	M6	14	15,74	2,5	15,1	60	9,1	3	10	on request
K1647.1108X16	A	without shaft	polished	-	M8	18	19,74	2,5	18,1	16	11,7	3	13	on request
K1647.1108X20	A	without shaft	polished	-	M8	18	19,74	2,5	18,1	20	11,7	3	13	on request
K1647.1108X25	A	without shaft	polished	-	M8	18	19,74	2,5	18,1	25	11,7	3	13	on request
K1647.1108X30	A	without shaft	polished	-	M8	18	19,74	2,5	18,1	30	11,7	3	13	on request
K1647.1108X35	A	without shaft	polished	-	M8	18	19,74	2,5	18,1	35	11,7	3	13	on request
K1647.1108X40	B	with shaft	polished	22	M8	18	19,74	2,5	18,1	40	11,7	3	13	on request
K1647.1108X45	B	with shaft	polished	22	M8	18	19,74	2,5	18,1	45	11,7	3	13	on request
K1647.1108X50	B	with shaft	polished	22	M8	18	19,74	2,5	18,1	50	11,7	3	13	on request
K1647.1108X60	B	with shaft	polished	22	M8	18	19,74	2,5	18,1	60	11,7	3	13	on request
K1647.1108X70	B	with shaft	polished	22	M8	18	19,74	2,5	18,1	70	11,7	3	13	on request
K1647.1108X80	B	with shaft	polished	22	M8	18	19,74	2,5	18,1	80	11,7	3	13	on request
K1647.1110X20	A	without shaft	polished	-	M10	22	23,74	2,5	22,1	20	15	4	16	on request
K1647.1110X25	A	without shaft	polished	-	M10	22	23,74	2,5	22,1	25	15	4	16	on request
K1647.1110X30	A	without shaft	polished	-	M10	22	23,74	2,5	22,1	30	15	4	16	on request
K1647.1110X35	A	without shaft	polished	-	M10	22	23,74	2,5	22,1	35	15	4	16	on request
K1647.1110X40	A	without shaft	polished	-	M10	22	23,74	2,5	22,1	40	15	4	16	on request
K1647.1110X45	B	with shaft	polished	26	M10	22	23,74	2,5	22,1	45	15	4	16	on request
K1647.1110X50	B	with shaft	polished	26	M10	22	23,74	2,5	22,1	50	15	4	16	on request
K1647.1110X60	B	with shaft	polished	26	M10	22	23,74	2,5	22,1	60	15	4	16	on request
K1647.1110X70	B	with shaft	polished	26	M10	22	23,74	2,5	22,1	70	15	4	16	on request
K1647.1110X80	B	with shaft	polished	26	M10	22	23,74	2,5	22,1	80	15	4	16	on request
K1647.1112X25	A	without shaft	polished	-	M12	26	28,25	3	25,1	25	16,1	5	18	on request
K1647.1112X30	A	without shaft	polished	-	M12	26	28,25	3	25,1	30	16,1	5	18	on request
K1647.1112X35	A	without shaft	polished	-	M12	26	28,25	3	25,1	35	16,1	5	18	on request
K1647.1112X40	A	without shaft	polished	-	M12	26	28,25	3	25,1	40	16,1	5	18	on request
K1647.1112X45	A	without shaft	polished	-	M12	26	28,25	3	25,1	45	16,1	5	18	on request
K1647.1112X50	B	with shaft	polished	30	M12	26	28,25	3	25,1	50	16,1	5	18	on request
K1647.1112X60	B	with shaft	polished	30	M12	26	28,25	3	25,1	60	16,1	5	18	on request
K1647.1112X70	B	with shaft	polished	30	M12	26	28,25	3	25,1	70	16,1	5	18	on request
K1647.1112X80	B	with shaft	polished	30	M12	26	28,25	3	25,1	80	16,1	5	18	on request
K1647.1116X30	A	without shaft	polished	-	M16	35	37,25	3	32,1	30	21,8	6	24	on request
K1647.1116X35	A	without shaft	polished	-	M16	35	37,25	3	32,1	35	21,8	6	24	on request
K1647.1116X40	A	without shaft	polished	-	M16	35	37,25	3	32,1	40	21,8	6	24	on request
K1647.1116X45	A	without shaft	polished	-	M16	35	37,25	3	32,1	45	21,8	6	24	on request
K1647.1116X50	A	without shaft	polished	-	M16	35	37,25	3	32,1	50	21,8	6	24	on request
K1647.1116X60	A	without shaft	polished	-	M16	35	37,25	3	32,1	60	21,8	6	24	on request
K1647.1116X70	B	with shaft	polished	38	M16	35	37,25	3	32,1	70	21,8	6	24	on request
K1647.1116X80	B	with shaft	polished	38	M16	35	37,25	3	32,1	80	21,8	6	24	on request
K1647.2104X08	A	without shaft	not polished	-	M4	10	11,25	2	11,1	8	5,9	3	7	on request
K1647.2104X10	A	without shaft	not polished	-	M4	10	11,25	2	11,1	10	5,9	3	7	on request
K1647.2104X12	A	without shaft	not polished	-	M4	10	11,25	2	11,1	12	5,9	3	7	on request
K1647.2104X16	A	without shaft	not polished	-	M4	10	11,25	2	11,1	16	5,9	3	7	on request
K1647.2104X20	A	without shaft	not polished	-	M4	10	11,25	2	11,1	20	5,9	3	7	on request
K1647.2104X25	B	with shaft	not polished	14	M4	10	11,25	2	11,1	25	5,9	3	7	on request
K1647.2104X30	B	with shaft	not polished	14	M4	10	11,25	2	11,1	30	5,9	3	7	on request
K1647.2104X35	B	with shaft	not polished	14	M4	10	11,25	2	11,1	35	5,9	3	7	on request
K1647.2104X40	B	with shaft	not polished	14	M4	10	11,25	2	11,1	40	5,9	3	7	on request
K1647.2105X10	A	without shaft	not polished	-	M5	12	13,25	2	13,1	10	7,4	3	8	on request
K1647.2105X12	A	without shaft	not polished	-	M5	12	13,25	2	13,1	12	7,4	3	8	on request
K1647.2105X16	A	without shaft	not polished	-	M5	12	13,25	2	13,1	16	7,4	3	8	on request
K1647.2105X20	A	without shaft	not polished	-	M5	12	13,25	2	13,1	20	7,4	3	8	on request
K1647.2105X25	B	with shaft	not polished	16	M5	12	13,25	2	13,1	25	7,4	3	8	on request
K1647.2105X30	B	with shaft	not polished	16	M5	12	13,25	2	13,1	30	7,4	3	8	on request
K1647.2105X35	B	with shaft	not polished	16	M5	12	13,25	2	13,1	35	7,4	3	8	on request
K1647.2105X40	B	with shaft	not polished	16	M5	12	13,25	2	13,1	40	7,4	3	8	on request
K1647.2105X45	B	with shaft	not polished	16	M5	12	13,25	2	13,1	45	7,4	3	8	on request
K1647.2105X50	B	with shaft	not polished	16	M5	12	13,25	2	13,1	50	7,4	3	8	on request
K1647.2106X12	A	without shaft	not polished	-	M6	14	15,74	2,5	15,1	12	9,1	3	10	on request
K1647.2106X16	A	without shaft	not polished	-	M6	14	15,74	2,5	15,1	16	9,1	3	10	on request
K1647.2106X20	A	without shaft	not polished	-	M6	14	15,74	2,5	15,1	20	9,1	3	10	on request
K1647.2106X25	A	without shaft	not polished	-	M6	14	15,74	2,5	15,1	25	9,1	3	10	on request
K1647.2106X30	B	with shaft	not polished	18	M6	14	15,74	2,5	15,1	30	9,1	3	10	on request
K1647.2106X35	B	with shaft	not polished	18	M6	14	15,74	2,5	15,1	35	9,1	3	10	on request
K1647.2106X40	B	with shaft	not polished	18	M6	14	15,74	2,5	15,1	40	9,1	3	10	on request
K1647.2106X45	B	with shaft	not polished	18	M6	14	15,74	2,5	15,1	45	9,1	3	10	on request
K1647.2106X50	B	with shaft	not polished	18	M6	14	15,74	2,5	15,1	50	9,1	3	10	on request
K1647.2106X60	B	with shaft	not polished	18	M6	14	15,74	2,5	15,1	60	9,1	3	10	on request
K1647.2108X16	A	without shaft	not polished	-	M8	18	19,74	2,5	18,1	16	11,7	3	13	on request
K1647.2108X20	A	without shaft	not polished	-	M8	18	19,74	2,5	18,1	20	11,7	3	13	on request
K1647.2108X25	A	without shaft	not polished	-	M8	18	19,74	2,5	18,1	25	11,7	3	13	on request
K1647.2108X30	A	without shaft	not polished	-	M8	18	19,74	2,5	18,1	30	11,7	3	13	on request
K1647.2108X35	A	without shaft	not polished	-	M8	18	19,74	2,5	18,1	35	11,7	3	13	on request
K1647.2108X40	B	with shaft	not polished	22	M8	18	19,74	2,5	18,1	40	11,7	3	13	on request
K1647.2108X45	B	with shaft	not polished	22	M8	18	19,74	2,5	18,1	45	11,7	3	13	on request
K1647.2108X50	B	with shaft	not polished	22	M8	18	19,74	2,5	18,1	50	11,7	3	13	on request
K1647.2108X60	B	with shaft	not polished	22	M8	18	19,74	2,5	18,1	60	11,7	3	13	on request
K1647.2108X70	B	with shaft	not polished	22	M8	18	19,74	2,5	18,1	70	11,7	3	13	on request
K1647.2108X80	B	with shaft	not polished	22	M8	18	19,74	2,5	18,1	80	11,7	3	13	on request
K1647.2110X20	A	without shaft	not polished	-	M10	22	23,74	2,5	22,1	20	15	4	16	on request
K1647.2110X25	A	without shaft	not polished	-	M10	22	23,74	2,5	22,1	25	15	4	16	on request
K1647.2110X30	A	without shaft	not polished	-	M10	22	23,74	2,5	22,1	30	15	4	16	on request
K1647.2110X35	A	without shaft	not polished	-	M10	22	23,74	2,5	22,1	35	15	4	16	on request
K1647.2110X40	A	without shaft	not polished	-	M10	22	23,74	2,5	22,1	40	15	4	16	on request
K1647.2110X45	B	with shaft	not polished	26	M10	22	23,74	2,5	22,1	45	15	4	16	on request
K1647.2110X50	B	with shaft	not polished	26	M10	22	23,74	2,5	22,1	50	15	4	16	on request
K1647.2110X60	B	with shaft	not polished	26	M10	22	23,74	2,5	22,1	60	15	4	16	on request
K1647.2110X70	B	with shaft	not polished	26	M10	22	23,74	2,5	22,1	70	15	4	16	on request
K1647.2110X80	B	with shaft	not polished	26	M10	22	23,74	2,5	22,1	80	15	4	16	on request
K1647.2112X25	A	without shaft	not polished	-	M12	26	28,25	3	25,1	25	16,1	5	18	on request
K1647.2112X30	A	without shaft	not polished	-	M12	26	28,25	3	25,1	30	16,1	5	18	on request
K1647.2112X35	A	without shaft	not polished	-	M12	26	28,25	3	25,1	35	16,1	5	18	on request
K1647.2112X40	A	without shaft	not polished	-	M12	26	28,25	3	25,1	40	16,1	5	18	on request
K1647.2112X45	A	without shaft	not polished	-	M12	26	28,25	3	25,1	45	16,1	5	18	on request
K1647.2112X50	B	with shaft	not polished	30	M12	26	28,25	3	25,1	50	16,1	5	18	on request
K1647.2112X60	B	with shaft	not polished	30	M12	26	28,25	3	25,1	60	16,1	5	18	on request
K1647.2112X70	B	with shaft	not polished	30	M12	26	28,25	3	25,1	70	16,1	5	18	on request
K1647.2112X80	B	with shaft	not polished	30	M12	26	28,25	3	25,1	80	16,1	5	18	on request
K1647.2116X30	A	without shaft	not polished	-	M16	35	37,25	3	32,1	30	21,8	6	24	on request
K1647.2116X35	A	without shaft	not polished	-	M16	35	37,25	3	32,1	35	21,8	6	24	on request
K1647.2116X40	A	without shaft	not polished	-	M16	35	37,25	3	32,1	40	21,8	6	24	on request
K1647.2116X45	A	without shaft	not polished	-	M16	35	37,25	3	32,1	45	21,8	6	24	on request
K1647.2116X50	A	without shaft	not polished	-	M16	35	37,25	3	32,1	50	21,8	6	24	on request
K1647.2116X60	A	without shaft	not polished	-	M16	35	37,25	3	32,1	60	21,8	6	24	on request
K1647.2116X70	B	with shaft	not polished	38	M16	35	37,25	3	32,1	70	21,8	6	24	on request
K1647.2116X80	B	with shaft	not polished	38	M16	35	37,25	3	32,1	80	21,8	6	24	on request