Cam screws with knife edge washer

go back

Products
- Operating parts | standard elements
  - Clamping elements
    - Fixture clamps, cam clamps
      - Cam screws with knife edge washer

Item description/product images

DescriptionMaterial:Knife edge washer.
Cam screw carbon steel.Version:Cam screw tempered to 10.9 and black oxidised.
Knife edge washer hardened and anodised.Note:The hardened knife edge washer is suitable for clamping rough pieces (saw cut stock, castings, forgings etc).
Not designed for clamping hardened materials with the torque specified.

Clockwise rotation is recommended for clamping. The hex socket on the screw should be on the right after tightening. (Screw in the cam screw as far as it will go, then turn it back one turn).

"A" = distance from workpiece to screw centre (cam screw).On request:Replacement screw for cam screws K1969Clamping force:Cam screws with knife edge washerFunctional principle:Clamping method:
1. Screw the cam screw in as far as it will go.
2. Screw the cam screw back one turn.
3. Position the workpiece.
4. Turn the cam screw clockwise to clamp the workpiece.
(The hex socket on the cam screw should now be on the right).

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.