Compression latches with stepped cam

go back

Products
- Operating parts | standard elements
  - Quarter-turn locks, edge protection profiles
    - Compression latches with stepped cam

Item description/product images

DescriptionMaterial:Housing, actuator, nut and cam die-cast zinc.
Flat seal rubber.Version:Housing, actuator, nut and cam, chrome-plated.Note:Compression latches with stepped cam are primarily used for doors and housings that require a high pressure on the seal. Right or left deployment. The locking direction is always clockwise. By turning the actuator to the right the door can be pulled incrementally into the frame by up to 9.5 mm at a maximum rotation of 270°.

The fastening nut is an earthing nut with teeth one side.

Water and dust tight according to IP65.Accessory:Key K0535Drawing reference:

Actuation:
a) square 7 mm
b) double lug 3 mm
c) double lug 5 mm

1) O-ring
2) Adapter

Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0527 Compression latcheswith stepped cam

275 kB

Drawings

Item selection/filter

Order No.	Actuation	A	L	S max.	Price
K0527.17301	square 7 mm	30 -9,5	30	20	on request
K0527.17401	square 7 mm	40 -9,5	40	30	on request
K0527.17501	square 7 mm	50 -9,5	50	40	on request
K0527.17601	square 7 mm	60 -9,5	60	50	on request
K0527.43301	double lug 3 mm	30 -9,5	30	20	on request
K0527.43401	double lug 3 mm	40 -9,5	40	30	on request
K0527.43501	double lug 3 mm	50 -9,5	50	40	on request
K0527.43601	double lug 3 mm	60 -9,5	60	50	on request
K0527.45301	double lug 5 mm	30 -9,5	30	20	on request
K0527.45401	double lug 5 mm	40 -9,5	40	30	on request
K0527.45501	double lug 5 mm	50 -9,5	50	40	on request
K0527.45601	double lug 5 mm	60 -9,5	60	50	on request