Clamping pins (high force)

go back

Products
- Operating parts | standard elements
  - Clamping elements
    - Pull clamps, thrust clamps
      - Clamping pins (high force)

Item description/product images

DescriptionMaterial:Carbon steel.Version:Pins tempered and ground.
Knurled knob tempered, black oxidised.Note:The clamping pin length must be adapted to the workpiece by the customer.
Dimension C defines the length of the clamping pin before machining.
The dimension C must be adapted by the customer to suit the thickness of the workpiece.
Afterwards, a thread with dimension J must be cut into the clamping pin.
The assembly drawing must be observed to determine the length of the clamping pin.
After machining the clamping pin to the correct overall length, the knurled knob is attached to the clamping pin using the two grub screws and locked.
Special features:

DownloadHere is all the information as a PDF datasheet:

Are you looking for CAD data? These can be found directly in the product table.

Datasheet K0911 Clamping pins (high force)

265 kB

Drawings

Item selection/filter

Order No.	A	B	C	D	E	F	G	H	J	K	T	Suitable for	Price
K0911.412100	12	12	100	18	23	38	6,5	M8	M8x8	21,5	7	K0911.506501	on request
K0911.416100	12	16	100	24	23	38	6,5	M8	M8x8	21,5	7	K0911.506501	on request
K0911.516120	16	16	120	24	29	48	9,5	M10	M10x10	28	9	K0911.638001	on request
K0911.520120	16	20	120	30	29	48	9,5	M10	M10x10	28	9	K0911.638001	on request